| Outside Diameter (mm) |
|---|
| O/D Range | + | - |
|---|
| 3 up to 6 | 0.00 | 0.12 |
| over 6 up to 10 | 0.15 |
| over 10 up to 18 | 0.18 |
| over 18 up to 30 | 0.21 |
| over 30 up to 50 | 0.25 |
| over 50 up to 80 | 0.30 |
| over 80 up to 120 | 0.35 |
| over 120 up to 180 | 0.40 |
| over 180 up to 250 | 0.46 |
| over 250 up to 315 | 0.52 |
| over 315 up to 400 | 0.57 |
| over 400 up to 500 | 0.63 |
| over 500 up to 600 | 0.68 |
|
| Inside Diameter (mm) |
|---|
| I/D Range | + | - |
|---|
| 3 up to 6 | 0.12 | 0.00 |
| over 6 up to 10 | 0.15 |
| over 10 up to 18 | 0.18 |
| over 18 up to 30 | 0.21 |
| over 30 up to 50 | 0.25 |
| over 50 up to 80 | 0.30 |
| over 80 up to 120 | 0.35 |
| over 120 up to 180 | 0.40 |
| over 180 up to 250 | 0.46 |
| over 250 up to 315 | 0.52 |
| over 315 up to 400 | 0.57 |
| over 400 up to 500 | 0.63 |
| over 500 up to 600 | 0.68 |
|
| Concentricity of Diameters |
|---|
| O/D Range | Tolerance | DIN |
|---|
| 3 up to 6 | 0.15 | 2.IT 11 |
| over 6 up to 10 | 0.18 |
| over 10 up to 18 | 0.22 |
| over 18 up to 30 | 0.26 |
| over 30 up to 50 | 0.32 |
| over 50 up to 80 | 0.60 | 2.IT 12 |
| over 80 up to 120 | 0.70 |
| over 120 up to 180 | 0.80 |
| over 180 up to 250 | 0.92 |
| over 250 up to 315 | 1.04 |
| over 315 up to 400 | 1.14 |
| over 400 up to 500 | 1.26 |
| over 500 up to 600 | 1.36 |
|
| Thickness |
|---|
| Group | Thickness Range | + | - |
|---|
| 1 | 0.20 up to 0.60 | 0.02 | 0.06 |
| over 0.60 to under 1.25 | 0.03 | 0.09 |
| 2 | 1.25 up to 3.80 | 0.04 | 0.12 |
| over 3.80 up to 6.00 | 0.05 | 0.15 |
| 3 | over 6.00 up to 14.00 | 0.10 | 0.10 |
|
| Overall Height |
| Group |
Thickness Range |
+ |
- |
| 1 |
under 1.25 |
0.10 |
0.05 |
| 2 |
1.25 up to 2.00 |
0.15 |
0.08 |
| over 2.00 up to 3.00 |
0.20 |
0.10 |
| over 3.00 up to 6.00 |
0.30 |
0.15 |
| 3 |
over 6.00 up to 14.00 |
0.30 |
0.30 |
|
| Spring Force Tolerance |
| Group |
Thickness Range |
Group force
deviation at
test height
lo - 0.75ho |
| + |
- |
| 1 |
under 1.25 |
25% |
7.5% |
| 2 |
1.25 up to 3.00 |
15% |
7.5% |
| over 3.00 up to 6.00 |
10% |
5% |
| 3 |
over 6.00 up to 14.00 |
5% |
5% |
|
| Guide Clearance |
| Outside or Inside Diameter |
Total Clearance |
| up to 16 |
0.20 |
| over 16 up to 20 |
0.30 |
| over 20 up to 26 |
0.40 |
| over 26 up to 31.5 |
0.50 |
| over 31.5 up to 50 |
0.60 |
| over 50 up to 80 |
0.80 |
| over 80 up to 140 |
1.00 |
| over 140 up to 250 |
1.60 |
|
